wrapstar

I have a rustys steering kit all tie Rod ends were replaced less then 10k but needs the one on the pitman arm replaced because of the angle it was at. Looking to get $200 shipped located in spring grove il.

wrapstar

Price drop $150

xjfiyafytr15

Might have an interest.

wrapstar

Pm me if your interested I'll hook you up need the money to buy new shocks

wrapstar

How about $100 sick of moving this around the garage. And need front shocks again.

884x4

This use 1 ton gm tres?

wrapstar

No they are larger then stock but still use the factory shank size. Its not a bad setup I just had a track bar for a larger lift and the angles were awful. I thinking this would be great with smaller lifts.

shailey

Still available?

wrapstar

Yes it is

grey90xj

guys check this thread out.

https://www.cherokeeforum.com/f69/jk...pacers-195358/

buyer should beware.dont send as a gift.

wrapstar

Yes buyer beware I'm an awful person for basically donating wj spacers and not paying the extra money for a tracking number they said 7 to 10 business days and we're shipping last Thursday. If you don't know what's going on don't trash my name.

cherokee-95

Still available?

wrapstar

Yes it is

bigredlimited88

how big of a lift were you running with this? jw since you said it was on bad angles with a big lift.

wrapstar

It was at 7.5" when I bought it and had a huge drop pitman and rock krawler 6.5-8.0 track bar worked ok but when I lowered it to 5.5" I took off the pitman off and still had the long track bar causing bump steer. So when I wallowed out the track bar mount I just redid everything.