I have an over the knuckle kit that I received with the Cherokee I just purchased that I do not need. The tie rod tube and drag link were made out of some heave tubing and the track bar along with both mounts were "custom ordered" (so I was told) This was going on a Cherokee with around 8 inches of lift. Only thins this is missing are 2 hiem joints on the drag link. I can supply measurements and pictures and answer any questions to the best of my knowledge upon request. Looking to get somewhere around 500 obo or trade for a decent set of 35/12.5/15 shoot me a pm or email spydftfd2@hotmail.com Located in the Richmond area but can meet in surrounding cities if need be.

 

Pics

 

Tie rod is 49 inches long not including the joints. Drag link is 33 inches not including the joints and the track bar is 15

 

These look like the rusty's OTK kit going for 490 on their site, brand new with everything.

http://www.rustysoffroad.com/rustys-...-steering.html

 

It appears that you are correct. Thank you for this info. Long story short the guy said he maid the drag link and tie rod. He even had some leftover tubing from when he "made" them. Anyhoo. I still do not need these any longer. I would much rather trade for a set of tires but all else fails lets drop the price to $420.00

 

If its home made you can build it for 250 with all new heims and know how well it's welded also that track bar is way to short it's a recipe for bump steer. Il give you 125 shipped

 

As stated above that it isn't made. Looking at it compared to the rustys kit leads me to fully believe that it is the rustys kit. I appreciate the offer but Ill pass. Also upon just holding these up to my Cherokee they would work just fine with no apparent bump steer.

 

I run this kit on my comanche with 7.5 inches of lift and the track bar has plenty of adjustment