So i need advice. i had a 4.5 lift on my xj with stock steering. all i had were lower control arms. well my friend gave me his old rustys 6.5 inch springs. i ordered a 4.5 leaf pack and i already have shackles on. i also ordered adjustable lower and upper control arms, extended brake lines, adjustable trac bar, new shocks and a pitman arm drop. is there something i am overlooking, or does that look about right?

 

what about drop brackets or long arms? if you do a pitman arm drop you need an equal drop for the track bar to keep your angles correct

 

Whats the scoop on your rear drive shaft?

 

im having a place make me a cv driveshaft for the rear, and are the drop brackets needed? sorry im fairly new to all this.

 

It'll ride better with those adjustable arms.

 

ok i will deff look into that. do i have all the needed parts for the front end? my axel was shifted over with the 4.5 lift so decided to do the adjustable trac bar so i hope it fixes it. but anything else i overlooked?

 

are the xj and tj adjustablte rack bars the same thing? ive seen on many sites they will fit both.