i got a set of free wronlger axles and i was wantin to put the ring and pinion in my 91 xj,is this possible?
they have yukon 4.11 gears and a front aussie locker,i want them in my xj but im not sure if they will fit

 

If it's a YJ 87-95 yes, TJs 97-05 have a low pinion axle and JKs are different as well.

 

well im not sure exactly what these are from,just know they are from a wrangler,with leaf set up up front

 

It it is a wrangler, not a CJ and has leaves up front it would be a YJ. That means high pinion 30 just like you. CJs also have a 30 front and leaves but it's low pinion and a passenger side drop.

 

so it would if in my xj?

 

If it came out of a YJ it will fit.

 

well it has the leaf spring perches up front and leafs under axle perches for the rear

 

Yes if its out of a yj the gears will work (assuming you're running a 30/35 combo)

Just get a master install kit and you'll be good to go

 

yea i have the 30/35 combo but i have a lsd rear,will those 4.11 gears from a open diff work wit a lsd 35?

 

Depends what ratio you have now

 

alright cool i reckon ill finish taken the gears out of the axles and get them ready for my xj

 

CJs have that as well but like I stated they are passenger drop and a different bolt pattern.

 

you will need the carriers from the front and rear that they came off of and the front must be high pinion to work