Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:

WOW terrible vibrations out of control!!?? help!

Thread Tools
 
Search this Thread
 
Old May 3, 2012 | 05:15 PM
  #16  
hankthetank's Avatar
CF Veteran
 
Joined: Nov 2011
Posts: 2,322
Likes: 1
From: Edmonton
Year: 1990
Model: Cherokee
Engine: 4.0
Default

Originally Posted by ridemrt
Can't imagine this being bad joints if I've never had an issue before but good idea on taking off the shaft to see. If it doesn't vibrate then that means its in my diff right?
No, if your truck was on a lift and your axle was drooped...your shocks are longer than stock....but you front ds is fairly stock...hmmm unloaded suspension could equal loaded Ujoints...in the front...thinking as I type...
Reply
Old May 3, 2012 | 05:17 PM
  #17  
hankthetank's Avatar
CF Veteran
 
Joined: Nov 2011
Posts: 2,322
Likes: 1
From: Edmonton
Year: 1990
Model: Cherokee
Engine: 4.0
Default

Originally Posted by fox128
The gearing could have made your vibes seem worse because you are spinning your driveshafts around 20% faster with 4.88s at any given speed. So your driveshafts are now prolly spinning as fast at 50mph as they used to at 50mph, roughly.

Not sure, but it makes sense to me.

So like was said, take off your front ds try to find where the prob is.
Yes! Good thinkin dude! Great minds think alike...
Reply
Old May 3, 2012 | 05:32 PM
  #18  
ridemrt's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2012
Posts: 41
Likes: 0
Model: Cherokee
Default

Oh I see. So what you are saying is that the bad joints on my driveshaft didn't seem so bad when my driveshaft was spinning slower? So there is not a new problem, just an old one that has come to light? It's starting to make some more sense. In that case is it a good idea for a new front ds anyway with a 6.5 in lift? Shouldn't it be a little longer to put my axel where it should be?
Reply
Old May 3, 2012 | 05:40 PM
  #19  
ridemrt's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2012
Posts: 41
Likes: 0
Model: Cherokee
Default

No suggestions?
Reply
Old May 3, 2012 | 05:44 PM
  #20  
hankthetank's Avatar
CF Veteran
 
Joined: Nov 2011
Posts: 2,322
Likes: 1
From: Edmonton
Year: 1990
Model: Cherokee
Engine: 4.0
Default

Just change Ujoints first...
Reply
Old May 3, 2012 | 06:18 PM
  #21  
fox128's Avatar
Seasoned Member
 
Joined: Sep 2008
Posts: 324
Likes: 2
From: Iowa
Year: 2000
Model: Cherokee
Engine: 4.0
Default

Originally Posted by ridemrt
Oh I see. So what you are saying is that the bad joints on my driveshaft didn't seem so bad when my driveshaft was spinning slower? So there is not a new problem, just an old one that has come to light? It's starting to make some more sense. In that case is it a good idea for a new front ds anyway with a 6.5 in lift? Shouldn't it be a little longer to put my axel where it should be?
Yeah that's what I'm saying. I mistyped at the end what I meant was your driveshafts are now turning as fast at 50 mph as they used to at 70mph with your stock gears.

If your vibes are the same at 50 as they were at around 70 you don't have a "new" problem.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Paco182
Jeep Builds
30
Jul 1, 2025 04:38 PM
ROCKRIDGE 4WD
Vendor Showcase
6
Jul 13, 2016 12:11 PM
toasterknight
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
33
May 21, 2016 07:03 AM
Lightning_19k
Modified XJ Cherokee Tech
14
Oct 3, 2015 09:52 PM
64dodge
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
Sep 30, 2015 05:50 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 10:19 AM.