Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:

Wheel spacers

Thread Tools
 
Search this Thread
 
Old 07-13-2012, 08:30 PM
  #1  
Member
Thread Starter
 
Jbeaujean28's Avatar
 
Join Date: Aug 2011
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default Wheel spacers

Im trying to clear something up with a buddy of mine, if I use wheel spacers on factory wheels on a 2 inch lifted XJ will he be in danger of them coming out while hes driving? Should he do it or no
Old 07-13-2012, 08:36 PM
  #2  
Seasoned Member
 
ProudXjOwner's Avatar
 
Join Date: Sep 2010
Location: Akron, OH
Posts: 440
Likes: 0
Received 0 Likes on 0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0 HO
Default

If you are talking about the spacer comming off they wont if you tighten the lugnuts the right way.
Old 07-13-2012, 08:39 PM
  #3  
CF Veteran
 
Atmos's Avatar
 
Join Date: Nov 2011
Location: City of Trees, CA
Posts: 7,387
Likes: 0
Received 10 Likes on 9 Posts
Year: 93 2 door
Model: Cherokee
Engine: 4.0
Default

then the same logic should apply to any stock wheel on any car. it's all held on by lug nuts.
is he afraid that the wheels are going to come off of his car too? lol
Old 07-13-2012, 08:56 PM
  #4  
Member
Thread Starter
 
Jbeaujean28's Avatar
 
Join Date: Aug 2011
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Originally Posted by ProudXjOwner
If you are talking about the spacer comming off they wont if you tighten the lugnuts the right way.
What would you say is the right way?
Old 07-13-2012, 08:57 PM
  #5  
Member
Thread Starter
 
Jbeaujean28's Avatar
 
Join Date: Aug 2011
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Originally Posted by Atmos
then the same logic should apply to any stock wheel on any car. it's all held on by lug nuts.
is he afraid that the wheels are going to come off of his car too? lol
Probably lol
Old 07-13-2012, 08:58 PM
  #6  
Member
Thread Starter
 
Jbeaujean28's Avatar
 
Join Date: Aug 2011
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

He wants rough country 1.5 inch spacers on a 2 inch lift with p235 75r 15s should he do it?
Old 07-13-2012, 09:17 PM
  #7  
Seasoned Member
 
ProudXjOwner's Avatar
 
Join Date: Sep 2010
Location: Akron, OH
Posts: 440
Likes: 0
Received 0 Likes on 0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0 HO
Default

Originally Posted by Jbeaujean28
What would you say is the right way?
115 Ft/Lbs in a star pattern checked monthly, more it wheeled.
Old 07-13-2012, 09:24 PM
  #8  
CF Veteran
 
peep's Avatar
 
Join Date: Oct 2010
Location: Ontario, Canada
Posts: 2,150
Likes: 0
Received 12 Likes on 9 Posts
Year: 1989 Laredo
Model: Cherokee
Engine: 4.0 L 6 Renix
Default Spaced Out

Buy quality, torque em, check em!
Spidertrax spacers came complete, 1.25 inch, no control arm rub with 31's and 3 in lift. I run 100 ft lb torque. Napa has fresh nuts if you need em.
I use antiseize.
100000 miles, no problems, and I check em monthly, no problems.
Attached Thumbnails Wheel spacers-xmas-2011-090.jpg  
Old 07-13-2012, 09:31 PM
  #9  
Member
Thread Starter
 
Jbeaujean28's Avatar
 
Join Date: Aug 2011
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Originally Posted by peep
Buy quality, torque em, check em!
Spidertrax spacers came complete, 1.25 inch, no control arm rub with 31's and 3 in lift. I run 100 ft lb torque. Napa has fresh nuts if you need em.
I use antiseize.
100000 miles, no problems, and I check em monthly, no problems.
If he has rough country 1.5" spacers and 100 ft pounds of torque with antiseize on a two inch lift would he be fine?
Old 07-13-2012, 09:38 PM
  #10  
CF Veteran
 
peep's Avatar
 
Join Date: Oct 2010
Location: Ontario, Canada
Posts: 2,150
Likes: 0
Received 12 Likes on 9 Posts
Year: 1989 Laredo
Model: Cherokee
Engine: 4.0 L 6 Renix
Default

yes he will be fine.
1st torque em all to 90 ft lb, with a criss cross pattern, then repeat torque and pattern at 100 ft lb (+10 / -0). then check em for 100 ft lb again tomorrow.
Old 07-13-2012, 09:46 PM
  #11  
Member
Thread Starter
 
Jbeaujean28's Avatar
 
Join Date: Aug 2011
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Originally Posted by peep
yes he will be fine.
1st torque em all to 90 ft lb, with a criss cross pattern, then repeat torque and pattern at 100 ft lb (+10 / -0). then check em for 100 ft lb again tomorrow.
Thanks
Old 07-13-2012, 10:28 PM
  #12  
CF Veteran
 
Atmos's Avatar
 
Join Date: Nov 2011
Location: City of Trees, CA
Posts: 7,387
Likes: 0
Received 10 Likes on 9 Posts
Year: 93 2 door
Model: Cherokee
Engine: 4.0
Default

Originally Posted by Jbeaujean28
He wants rough country 1.5 inch spacers on a 2 inch lift with p235 75r 15s should he do it?
he can trim his fenders, remove his rear sway bar, and replace his UCA mount bushings and get better performance than buying that useless kit
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
OverlandZJ
Wanted
4
10-31-2015 11:54 AM
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
13
10-04-2015 10:52 PM
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-07-2015 11:30 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Wheel spacers



All times are GMT -5. The time now is 12:10 PM.