I want to know how it drives now as is?
Cause I have a similar plan that I might get to someday. LOL.

 

If you haul stuff in the back, you might want to leave the front alone. The front isn't sagging if it measured 17.5". XJ's look better sitting higher in the back,

 

A really nice jeep that lift is perfect listen I’m looking to do pretty much the same thing I don’t do any crawling or major off Rodin but I do haul some stuff once in a while did you do all that without replacing track bar and anti-sway bar link bolt kits I’m thinking about putting in the moog782s also I can get them for 70 a pair cheapie cheap

 

I go off-road during the summer months but nothing crazy. So far I've done the back with just springs and ubolt kit, had to press in the bushings for the crown leafs. Used a 18" threaded rod, nuts, washers, and 2 plumbing black iron floor fittings from home depot. gonna do the front with moogcc782 coils when the weather is much better.

 

Did you have to change out or length thing the track bar or replace control arms for the 782s what I’m getting at isCan I do to 782’s without doing all that suspension I just want to inches

 

If your wanting a 2" lift up front using Moog 782's you'll need to add 3/4" spacers w/o the isolators. Other than that your good to go. I did add a track bar relocation bracket to center the front axle. I guess some here didn't need to.

 

From what I gathered you don’t need to do anything else for the upcountry lift that yields 1-2” of lift. Once you get to 3”+ is when you need to look into replacing control arms and track bar.

 

Thank you so much fellas both your replies answered both of my questions thank you ordering the 782s tonight Love my Cherokee
Also ordering the spacers thank you ezEarl