want to get a ford 8.8 for 99 xj
#16
CF Veteran
Join Date: Jun 2009
Location: Michigan
Posts: 2,168
Received 300 Likes
on
249 Posts
Year: 1987 MJ, 1973 J2000, 1986 XJ, 08 JK
Model: Comanche (MJ)
Engine: 4.0L H.O
i wouldn't have just anyone with a welder just jump in and weld the tubes to the cast housing. I used my rinky 110 mig to weld on new perches, no big deal but i wouldn't even bother trying to weld the tubes with it. I'd leave it up to someone who has experience welding with cast before and has an appropriate welder to do so.
#17
Senior Member
Join Date: Nov 2012
Location: Tx
Posts: 999
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: I-6
i wouldn't have just anyone with a welder just jump in and weld the tubes to the cast housing. I used my rinky 110 mig to weld on new perches, no big deal but i wouldn't even bother trying to weld the tubes with it. I'd leave it up to someone who has experience welding with cast before and has an appropriate welder to do so.
Didnt someone bring up the fact that the housing is not cast iron but rather cast steel. cant remember where I saw it but I ran across it.
http://weldingweb.com/showthread.php?t=53296
Last edited by Aljay; 01-01-2013 at 05:54 PM.
#18
It's cast steel, not cast iron.
Proper pre and post heating is easy.
Do you know how many 8.8's have been welded with 6011 rod or a 110v welder without any special processes? I promise you its more than 10 or 12....
Proper pre and post heating is easy.
Do you know how many 8.8's have been welded with 6011 rod or a 110v welder without any special processes? I promise you its more than 10 or 12....
#19
CF Veteran
Join Date: Jun 2009
Location: Michigan
Posts: 2,168
Received 300 Likes
on
249 Posts
Year: 1987 MJ, 1973 J2000, 1986 XJ, 08 JK
Model: Comanche (MJ)
Engine: 4.0L H.O
i'm just not one just to tell someone "yea just weld it... or just go do it." i'd rather give them some proper info instead of setting them up for possible failure
#20
Senior Member
Join Date: Nov 2012
Location: Tx
Posts: 999
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: I-6
Oh yeah Serious knows alittle about fab too found a thread from back in 2006 this guy designed and built a set of long arms .... I believe they were on Mrs. Serious daily driven xj ! His co. Sells the kit today . That's pretty awesome and takes the guessing is it beefy out of it .
Last edited by Aljay; 01-01-2013 at 09:28 PM.
#22
CF Veteran
Join Date: Mar 2010
Location: Jacksonville, FL
Posts: 6,685
Likes: 0
Received 5 Likes
on
5 Posts
Year: 92
Model: Cherokee
Engine: 4.0
Originally Posted by NOTNSUV
Is the ford 8.8" the rear diff that we old guys call a Ford 9"? I have one in my shop in 4.10 out of an old Ford pickup.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)