Well I have beendoing a lot of research and I can't find what I'm looking for..... if anyone has a link to somewere I can order the coil spring perches for the front 44 I would greatly appreciate it.... also if anyone has done this swap let me know because I would like to know what backspacing your rims are and what it looks like.... the plan is to only run 35s but I will see what happens when time comes to order larger tires... by the way this is all going into my xj

http://www.ballisticfabrication.com/...arts_c_32.html

http://www.ruffstuffspecialties.com/...ngOptions.html

http://www.barnes4wd.com/product_inf...oducts_id=2254

Thanx junky apparently I was searching the wrong item.... oops

http://www.seriousoffroadproducts.co...ducts_id=86745

http://www.seriousoffroadproducts.co...ducts_id=86734

Complete kit without truss:
http://www.seriousoffroadproducts.co...ducts_id=86783

Complete kit with truss:
http://www.seriousoffroadproducts.co...ducts_id=86965

I'm running 38s on a 4.5 inch lift with a waggy 44 and my rims have 3.5 inches of backspacing. Look at my build thread to see how it looks. pm me if you have any questions
Let me know.if you need a 44 front axle also I'm swapping mine for a 60

FWIW,
My front D44 is narrowed to waggy width and I'm running 15" alloy wheels with 3 5/8" B.S.

Thanx guys... serious when it comes time to order my parts ill definately be ordering from you guys.... I was thinking about ordering rims with as minimum of backspacing as possible... try and suck the tires in