waggy 44 questions
 

Well I have beendoing a lot of research and I can't find what I'm looking for..... if anyone has a link to somewere I can order the coil spring perches for the front 44 I would greatly appreciate it.... also if anyone has done this swap let me know because I would like to know what backspacing your rims are and what it looks like.... the plan is to only run 35s but I will see what happens when time comes to order larger tires... by the way this is all going into my xj

http://www.ballisticfabrication.com/...arts_c_32.html

http://www.ruffstuffspecialties.com/...ngOptions.html

http://www.barnes4wd.com/product_inf...oducts_id=2254

Thanx junky apparently I was searching the wrong item.... oops :furious:

http://www.seriousoffroadproducts.co...ducts_id=86745

http://www.seriousoffroadproducts.co...ducts_id=86734

Complete kit without truss:
http://www.seriousoffroadproducts.co...ducts_id=86783

Complete kit with truss:
http://www.seriousoffroadproducts.co...ducts_id=86965

I'm running 38s on a 4.5 inch lift with a waggy 44 and my rims have 3.5 inches of backspacing. Look at my build thread to see how it looks. pm me if you have any questions :thumbsup:
Let me know.if you need a 44 front axle also I'm swapping mine for a 60

FWIW,
My front D44 is narrowed to waggy width and I'm running 15" alloy wheels with 3 5/8" B.S.

Thanx guys... serious when it comes time to order my parts ill definately be ordering from you guys.... I was thinking about ordering rims with as minimum of backspacing as possible... try and suck the tires in