Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:

Unstable

Thread Tools
 
Search this Thread
 
Old 10-13-2015, 10:52 AM
  #1  
Junior Member
Thread Starter
 
Perrin Pockets's Avatar
 
Join Date: Sep 2013
Location: South Florida
Posts: 88
Likes: 0
Received 0 Likes on 0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L I6 Power Tech
Default Unstable

I put a 3" zone lift kit on my 98 xj, ive had to drop the Tcase, shim the lower control arms, adj track bar, and quick release sway bar ext. Ive gotten the wobble to go away but then every few months it comes back. I decided to try to change the steering stabilizer shock, but was not able to get the old one off abd ended up sawing and trying to drill out the old pressed bolt to no avail. After driving a few days with no stabilizer i got death wobble very bad and sheered the threaded bolt out of the TRE on fram side of track bar. Now everything has gone very bad. I replaced the TRE but ztill no stabilizer. Can anyone confirm the angle of my pitman arm and front sway bar look right? I feel thats where my problem is now



Should drag ling (edit: pitman arm not drag link sorry) be at that upward agle? Camera is level with jeep





Are my links to long? Angle looks wierd to me
**Noticed im posting in the wrong section, im using my phone and thought I was on the all lift and tires thread, somehow that changed while posting sorry.**

Last edited by Perrin Pockets; 10-15-2015 at 10:24 AM. Reason: Change part name from drag link to pitman arm, also posten in wrong thread
Old 10-13-2015, 01:18 PM
  #2  
CF Veteran
 
toasterknight's Avatar
 
Join Date: Jan 2015
Location: Oregon Coast
Posts: 1,508
Likes: 0
Received 4 Likes on 4 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Default

Your sway bar links are an inch or two too long.
Old 10-13-2015, 07:44 PM
  #3  
Seasoned Member
 
Paco182's Avatar
 
Join Date: Jun 2009
Location: Earth
Posts: 337
Likes: 0
Received 19 Likes on 16 Posts
Year: 1998
Model: Grand Cherokee
Engine: 5.9 V8
Default

Originally Posted by Perrin Pockets
I put a 3" zone lift kit on my 98 xj, ive had to drop the Tcase, shim the lower control arms, adj track bar, and quick release sway bar ext. Ive gotten the wobble to go away but then every few months it comes back. I decided to try to change the steering stabilizer shock, but was not able to get the old one off abd ended up sawing and trying to drill out the old pressed bolt to no avail. After driving a few days with no stabilizer i got death wobble very bad and sheered the threaded bolt out of the TRE on fram side of track bar. Now everything has gone very bad. I replaced the TRE but ztill no stabilizer. Can anyone confirm the angle of my drag link and front sway bar look right? I feel thats where my problem is now
...
Should drag ling be at that upward agle? Camera is level with jeep
...
Are my links to long? Angle looks wierd to me
First of all, wrong thread. Can a moderator move this?
Your trackbar/draglink angles look adequate, it's hard to tell from the side. They should be parallel. Swaybar links are too long, putting it around 30 degrees. Ideal is 10 degrees but 5-15 is acceptable.
You must have been crazy or desperate to drive without a steering stabilizer.
Good luck tackling your wobble.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
9294Forrest
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
07-31-2015 09:18 PM
Xj88
Other Vehicles. Other Jeep models & cars and trucks of other makes
5
07-05-2014 10:51 AM
Borneo Batman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
10-19-2012 06:28 PM
Swamp Donkey
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
08-23-2009 04:35 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Unstable



All times are GMT -5. The time now is 05:47 PM.