trying to fix shackle angle but not add lift
#1
Member
Thread Starter
Join Date: Oct 2011
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
trying to fix shackle angle but not add lift
I just installed my rc 4.5x lift and like expected the shackle is pulled pretty far forward. Id like to buy the shackle relocation bracket and fix it and possibly new shackles nut try to keep the lift around 5". any body have any examples of hat they did in my situation
#2
CF Veteran
Join Date: Jan 2010
Location: Virginia Beach by way of Michigan
Posts: 5,482
Likes: 0
Received 24 Likes
on
24 Posts
relocation bracket is what you should look at. RC's is pretty good, but check into Liquid Iron Industries as well. They're a little more money, but they're also one piece welded.
#4
Senior Member
Join Date: Oct 2011
Location: Warren, PA 16365
Posts: 763
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
Shackle relocation bracket is the answer.
As you "lift" you're angling the shackle, so it negates the lift.
As the stock (or lifted) shackle is brought down 3/4-1" it also angles to 45* or so, removing 3/4-1" of lift. it will all even itself out without adding lift.
As you "lift" you're angling the shackle, so it negates the lift.
As the stock (or lifted) shackle is brought down 3/4-1" it also angles to 45* or so, removing 3/4-1" of lift. it will all even itself out without adding lift.
#5
Senior Member
Join Date: May 2011
Location: Jackson,TN
Posts: 713
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Did your kit come with the adjustable shackles? if so just go to the upper hole and you will lose the inch you gained from the relocation bracket.
#6
Member
Thread Starter
Join Date: Oct 2011
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
but the thing is right now it is angled at 45 degrees its just the bottom of the shackle is towards the front not the back I guess ill just have to buy a set of adjustable shackles and adjustable coil spring spacers along with the relocation bracket ill add pics soon
#7
CF Veteran
Join Date: Dec 2010
Location: Frankfort IL
Posts: 1,385
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0
I have RC 4.5 leaf springs. You have to measure from the top of the axle tube to the frame and compare it to the stock measurement. After I installed the leafs I was sitting at almost 6in. After they settled it was more like five. The shackle angle was horrific so I installed RC relocators and that increased the lift about 3/4in. Then I removed the 3rd leaf from the bottom and after settling down I am at exactly 4.25in with the stock shackle at 45degree. It flexes awesome. The stock shackle will hit the brackets on the sides when fully collapsed while flexing but that is not an issue to me at all. Also I am planning on adding a 1in shackle to improve flex as it will open/pivot more. But thats after I do an SYE.
Trending Topics
#8
CF Veteran
Join Date: Dec 2010
Location: Frankfort IL
Posts: 1,385
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0
Either way you go the bottom line is : The RC relocators used with the RC leafs and stock shackle will give you 3/4 in when the shackle is set up at 45degree angle.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)