I just installed my rc 4.5x lift and like expected the shackle is pulled pretty far forward. Id like to buy the shackle relocation bracket and fix it and possibly new shackles nut try to keep the lift around 5". any body have any examples of hat they did in my situation

 

relocation bracket is what you should look at. RC's is pretty good, but check into Liquid Iron Industries as well. They're a little more money, but they're also one piece welded.

 

yeah im going to buy a set but they add lift and I dont want to add too much im just trying to see how much and who has used them with rcs 4.5 leaf pack

 

Shackle relocation bracket is the answer.
As you "lift" you're angling the shackle, so it negates the lift.
As the stock (or lifted) shackle is brought down 3/4-1" it also angles to 45* or so, removing 3/4-1" of lift. it will all even itself out without adding lift.

 

Did your kit come with the adjustable shackles? if so just go to the upper hole and you will lose the inch you gained from the relocation bracket.

 

but the thing is right now it is angled at 45 degrees its just the bottom of the shackle is towards the front not the back I guess ill just have to buy a set of adjustable shackles and adjustable coil spring spacers along with the relocation bracket ill add pics soon

 

I have RC 4.5 leaf springs. You have to measure from the top of the axle tube to the frame and compare it to the stock measurement. After I installed the leafs I was sitting at almost 6in. After they settled it was more like five. The shackle angle was horrific so I installed RC relocators and that increased the lift about 3/4in. Then I removed the 3rd leaf from the bottom and after settling down I am at exactly 4.25in with the stock shackle at 45degree. It flexes awesome. The stock shackle will hit the brackets on the sides when fully collapsed while flexing but that is not an issue to me at all. Also I am planning on adding a 1in shackle to improve flex as it will open/pivot more. But thats after I do an SYE.

 

Either way you go the bottom line is : The RC relocators used with the RC leafs and stock shackle will give you 3/4 in when the shackle is set up at 45degree angle.