Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:

Track bar bolt

Thread Tools
 
Search this Thread
 
Old 10-08-2011, 02:20 PM
  #1  
CF Veteran
Thread Starter
 
mr white's Avatar
 
Join Date: Aug 2011
Posts: 3,648
Likes: 0
Received 4 Likes on 4 Posts
Model: Cherokee
Default Track bar bolt

You know that bolt that ties the track bar to the axle? That **** is stuck. The nut is off, but the bolt WILL NOT slide out. I've tried prying it out. I've tried melting it out. I've tried drilling it out (which is taking forever). I might just cut the track bar and the bolt. Any ideas?
Old 10-08-2011, 02:23 PM
  #2  
CF Veteran
Thread Starter
 
mr white's Avatar
 
Join Date: Aug 2011
Posts: 3,648
Likes: 0
Received 4 Likes on 4 Posts
Model: Cherokee
Default

Maybe melt the bushing out completely?
Old 10-08-2011, 02:53 PM
  #3  
Junior Member
 
HiDefXJ's Avatar
 
Join Date: Mar 2009
Location: VA.
Posts: 91
Likes: 0
Received 0 Likes on 0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Default

Just encountered the same issue on Friday. If you have access to an air ratchet, wiggle the track bar up/down side to side while ratcheting the bolt out.
Oh yea, pb blaster is helpful too!
Good luck!
Old 10-08-2011, 03:09 PM
  #4  
CF Veteran
 
OnlyInMyXJ22's Avatar
 
Join Date: May 2008
Location: Brighton, MI
Posts: 2,202
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Too much tension on it. Unbolt the other end of track bar...

Or put a screw driver behind head of bolt and pry.

Cutting or attempting to burn anything is very unnecessary.
Old 10-08-2011, 09:30 PM
  #5  
CF Veteran
Thread Starter
 
mr white's Avatar
 
Join Date: Aug 2011
Posts: 3,648
Likes: 0
Received 4 Likes on 4 Posts
Model: Cherokee
Default

**** was seized into the bushing. Had to cut it on both sides with a sawz-dangerous (chinese sawzall)
Old 10-08-2011, 09:35 PM
  #6  
Member
 
lngliv3's Avatar
 
Join Date: Apr 2011
Location: Newport Michigan
Posts: 129
Likes: 0
Received 0 Likes on 0 Posts
Year: 1994
Model: Cherokee
Default

I did the same thing .... But i used a craftsman cordless sawzall.....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
03-04-2023 01:10 PM
tokelyn
Wanted
6
09-10-2015 10:27 AM
Rich164
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-08-2015 08:32 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Track bar bolt



All times are GMT -5. The time now is 09:00 AM.