Is there a quick release door for a xj? Or something you can do so you can take off the doors faster?

Cut your hinges like this: (depending on year)



And make disconnects for your wires going to the door. I can take all 4 off and quick as I can walk around the Jeep and lift up.

Will that mess you my door at all? I have a 94 xj sport

Nope. I have a 94 sport too. If you do it right there shouldn't be any problems.

So do you take the door off an cut the door Hinges? Or the one bolted on the jeep?

i just did this a few weeks ago and it is sooooo nice

Bolted on.

you cut the part of the hinge that bolts to the door, i unbolted the doors so that i had more room to work

So basically just take off the door and cut the bottom or the Hinge off so it slide in and out?

Sure. If you unbolt it the chances of it not lining up perfectly again are higher.

The pins need to be pressed out and driven into the door on the passenger side.

There are a few really good write-up's about the doorless mod on here, just use the search function.

The pins need to be pressed out and driven into the door on the passenger side.
What do you mean by driven Into the door?

They're splined and pressed into the door from the bottom. You have to cut the hinge, press the pin out, and then round off the bottom of the pin and the splines them beat it into the door so it's like the drivers side.

Okay sounds great I will try and tell you how it went.

I just did this two weeks ago and I've gotta say I'm loving it! My plan is to make some half doors at some point for wheeling. But for just cruising around town its great.

I have power everything so I had to make some quick connects out of grand Cherokee door harnesses.