Teraflex 3" TJ coils on XJ
#1
Junior Member
Thread Starter
Join Date: Sep 2014
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Teraflex 3" TJ coils on XJ
Hey all,
I am looking to boost my XJ from 2" Teraflex coil spacers to about 3-3.5" of lift in the front. Right now I am sitting at about 2.5" up front with the Tera spacers. I am currently running RE 2.5" Full length AAL in the rear which ended up netting me close to 4". So unfortunately my jeep has a decent rake to it which I am now getting around to eliminating. Has anyone ever installed these particular springs into their XJ? I read on another forum that due to spring rates etc that the 3" Tera TJ coils will give an XJ about 3.5" of lift. I just do not want to exceed 3.5" of lift, however I do not want to fall short of 3" either by doing this install. Any help and suggestions are appreciated.
I am looking to boost my XJ from 2" Teraflex coil spacers to about 3-3.5" of lift in the front. Right now I am sitting at about 2.5" up front with the Tera spacers. I am currently running RE 2.5" Full length AAL in the rear which ended up netting me close to 4". So unfortunately my jeep has a decent rake to it which I am now getting around to eliminating. Has anyone ever installed these particular springs into their XJ? I read on another forum that due to spring rates etc that the 3" Tera TJ coils will give an XJ about 3.5" of lift. I just do not want to exceed 3.5" of lift, however I do not want to fall short of 3" either by doing this install. Any help and suggestions are appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
Redwolf624
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
06-29-2016 08:40 AM
02809bristol
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
12-19-2015 11:00 PM
Stephen Stumbo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
12-18-2015 11:11 AM
GingaWithAJeep
Modified Grand Cherokee Tech. All ZJ,WJ & WK aftermarket tech goes here
5
12-18-2015 12:17 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)