jebmccall

so im needing to convert my rear to a a double cardan driveshaft and while on ebay i came across this double cardan drive shaft from tattons with out the slip joint in the drive shaft. it still slides in to the t-case.

http://www.ebay.com/itm/JEEP-CV-DRIV...c1b00f&vxp=mtr

i am trying to avoid the cost of an sye, becuase i do not have the time or place to install it myself. my jeep is going to be sitting at approximately 5.5 in the front and 4.5 in the rear. running a chrysler 8.25. will this driveshaft ensure i dont have any vibes? also my new leafs have 4 degree of shims.

jebmccall

no body???

dogger15

$250 you can do an sye and ds for less

Can do sye in 45 min or so too

MountiansRcool

look at iron rock offroad's hack & tap, its cheep and if you blow up ur t case u can re use the sye

xjfirefighter

I wheel mine pretty good, never had an issue , easily to install for the average back yard mechanic

MudMann94

X2 on the IRO Hack and Tap! Mine has held up great

1998xjspt

What driveshaft would y'all suggest gettin with the IRO hack n tap?

xjfirefighter

A stock front ds from an automatic xj

jebmccall

baack to this DS.... i have looked at the other options and if this wont work i will put in an sye...

jebmccall

well just spoke to tattons. he said this style shaft works good on xjs but not on tjs, yjs or cj5s because of how short they are. so im going to put my lift on and then measure and order one in i guess.

srb531

thats a reasonable price for a custom built ds, should work fine.