So I'm going to be installing a rough country 4 and a 1/2 inch lift kit. I had also ordered the rough country slip yolk eliminator kit.. I'm wondering though if the front drive shaft from a stock Cherokee will fit with this kit as it does with the hack and tap kits.

 

Nobody has used epigh countey sye and stock front drive shaft?

 

Yes. Many have done exactly that (and have posted about it in the past)

 

$45 Drive shaft out of a Grand Cherokee for years. Just get under your rig and measure after you get the work done and go to the salvage yard and measure until you get a close match. It's not to hard to rebuild the double cardan either. You want to be sure to get the pinion angle set before running it. A bad pinion angle would ruin the double cardon pretty quickly.

 

Yes I've heard the pinion angle gets thrown out of whack.

 

it usually only off 3°-7° and just using a wedge shim between your leaf pack and axle mount.