SYE and 3 inch lift on later yaers XJ
CF Veteran
Joined: Feb 2011
Posts: 1,048
Likes: 0
From: Georgia
Year: 2004
Model: Grand Cherokee (WJ)
Engine: 4.0 Inline 6
The tap I have looks like the middle one in the pic. It does not seem to have enough taper to bite into the metal good.
CF Veteran
Joined: Feb 2011
Posts: 1,048
Likes: 0
From: Georgia
Year: 2004
Model: Grand Cherokee (WJ)
Engine: 4.0 Inline 6
Well I was going to order that set of 3 taps off of ebay but I was out of town this past week for work and did not have access to internet. It was down at the place I was at.
So...I picked up a single tap made by Irwin from the local hardware store. I figured what was another $6, right? I quickly found out that not all taps are made the same. This one worked like a charm so I finally got the hole tapped. Success!
Learn something new everyday.
So...I picked up a single tap made by Irwin from the local hardware store. I figured what was another $6, right? I quickly found out that not all taps are made the same. This one worked like a charm so I finally got the hole tapped. Success!
Learn something new everyday.
Junior Member
Joined: Jun 2012
Posts: 30
Likes: 0
From: Michigan
Year: 1997
Model: Cherokee
Engine: 4.0L
the later year xjs seem to be alittle more iffy on the vibes. if you have the cash rustys makes a cross member with a built in 1 inch drop but you dont loose any clearance like the traditional block drop.
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
Mar 4, 2023 01:10 PM
ARCH4NGEL_II
Modified XJ Cherokee Tech
0
Sep 7, 2015 12:18 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)





