so i been thinkin about swapping my axles to a pair of dana 60's. i know it seems over kill but i got a killer deal on them. has anybody ever done this? wondering if there is already a thread on this subject or if somebody can point me in the right direction.
CF Veteran
Quote:
It's a lot more work than just swapping them outOriginally Posted by xjcherokee90
so i been thinkin about swapping my axles to a pair of dana 60's. i know it seems over kill but i got a killer deal on them. has anybody ever done this? wondering if there is already a thread on this subject or if somebody can point me in the right direction.
Former Sponsor
There are tons and tons of threads of people swapping axles. Unfortunately not a lot here. I suggest you look at pirate4x4.com and browse around.
this is a great thread here. They are 44's but its the same idea
https://www.cherokeeforum.com/f46/my-2000-xj-67081/
this is a great thread here. They are 44's but its the same idea
https://www.cherokeeforum.com/f46/my-2000-xj-67081/
Quote:
all the more reason to do it thenOriginally Posted by Daltonamorph
Never been done before. Cant do it
CF Veteran
CF Veteran
Quote:
all the more reason to do it then
Do not color outside the lines!Originally Posted by xjcherokee90
all the more reason to do it then
Junior Member
Quote:
So damn true.Originally Posted by DeftwillP
If you have to ask for a thread about it, you're probably not ready.
CF Veteran
Quote:
X2Originally Posted by DeftwillP
If you have to ask for a thread about it, you're probably not ready.
Go search until u find all the info. Then ask specific questions.
Quote:
Originally Posted by DeftwillP
If you have to ask for a thread about it, you're probably not ready.
i know i can do it. trail and error will be a factor im sure. but only way to find out is to jump right in and do it.
Senior Member
why do you want d60's? gonna be running a 40" tire..........
A properly built front king pin dana 60 with gears, lockers, shafts, brackets, and ctm ujoints is gonna cost you at leat 3k-4k.
A properly built front king pin dana 60 with gears, lockers, shafts, brackets, and ctm ujoints is gonna cost you at leat 3k-4k.
Quote:
A properly built front king pin dana 60 with gears, lockers, shafts, brackets, and ctm ujoints is gonna cost you at leat 3k-4k.
not going all out on them yet. just a thought right now. picked up a freshly rebuilt 60 rear for 40 bucks. guy was needin cash fast so i figured why not. been thinkin more ford 8.8 rear and waggy 44 front with no bigger than 37'sOriginally Posted by xjbeadlocks
why do you want d60's? gonna be running a 40" tire..........A properly built front king pin dana 60 with gears, lockers, shafts, brackets, and ctm ujoints is gonna cost you at leat 3k-4k.