Steering help identification/help needed...
#1
Senior Member
Thread Starter
Join Date: May 2011
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Steering help identification/help needed...
I bought this jeep and the original owner is unsure on which track bar is on here. I know it is a T&T bracket, but what about the bar? Also, the track bar isnt really matching the same angles is it? Any way to fix that easily?
I dont notice really any wobble at all, but she will pull into the crowns on the road. Bumps will throw her a little, but nothing I dont consider odd. I do want to stitch weld the track bar bracket though.
I dont notice really any wobble at all, but she will pull into the crowns on the road. Bumps will throw her a little, but nothing I dont consider odd. I do want to stitch weld the track bar bracket though.
#2
Get rid of the drop pitman arm and put a stock one back on. That alone will help with your bump steer.
Looks like a TNT or RE trackbar.
Steering appears to be Currie.
Looks like a TNT or RE trackbar.
Steering appears to be Currie.
#3
Do you hear banjos?
^^THIS!!^^ I agree, I was thinking RE...
No need for a dropped PA when your frame side TB mount is in the stock location. The two arms moving at different angles, are what is causing your bump steer...Drag link and TB should be on the same plane in order to make an XJ happy...HTH!!
No need for a dropped PA when your frame side TB mount is in the stock location. The two arms moving at different angles, are what is causing your bump steer...Drag link and TB should be on the same plane in order to make an XJ happy...HTH!!
Thread
Thread Starter
Forum
Replies
Last Post
The Aristocrat
Wanted
2
02-25-2017 01:17 AM
kend3031
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
09-30-2015 08:15 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)