Spare Tire Bumper
#1
Newbie
Thread Starter
Join Date: Feb 2011
Location: Alabama
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Spare Tire Bumper
Was considering putting on a roof rack and storing the spare up there....after thinking about it, seems like a pain in the rear to remove if I had a flat. I looked at the XJ Tailbone but that seems like a lot of work to install. Does anyone make an economical bumper with a swing out tire carrier? $900.00 is a little rich for me. Am I dreaming?
#2
CF Veteran
Join Date: Mar 2008
Location: Florence SC
Posts: 2,266
Likes: 0
Received 8 Likes
on
3 Posts
Year: 1996
Engine: 4.0
the detours is a very good swing and recovery point for a rig.
other options 820 gets a JCR to your door
http://www.jcroffroad.com/Merchant2/...egory_Code=XJB
$120 gets you the major parts you need
From A to Z fab
http://www.atozfabrication.com/store...lders-Kit.html
from AJS offroad armor
http://www.ajsoffroadarmor.com/produ...cat=256&page=1
other options 820 gets a JCR to your door
http://www.jcroffroad.com/Merchant2/...egory_Code=XJB
$120 gets you the major parts you need
From A to Z fab
http://www.atozfabrication.com/store...lders-Kit.html
from AJS offroad armor
http://www.ajsoffroadarmor.com/produ...cat=256&page=1
#4
Senior Member
Join Date: Dec 2010
Location: Linthicum, Md
Posts: 903
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Cherokee
Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM
what size tire you have as spare?
the stock bumper with tire carrier can accommodate up to a 31" tire
i have the stock swing out tire carrier myself, I found it as a CL steal for $35 inlcuding the bumper, which i didnt have so it worked out great for me
I did take a 1/8" piece of sheet metal to put behind the thin metal body so when i attached the screws and extra large washers, it in theory could hold and distribute the weight better. effectively keeping my tire carrier from ripping out by accident.
the stock bumper with tire carrier can accommodate up to a 31" tire
i have the stock swing out tire carrier myself, I found it as a CL steal for $35 inlcuding the bumper, which i didnt have so it worked out great for me
I did take a 1/8" piece of sheet metal to put behind the thin metal body so when i attached the screws and extra large washers, it in theory could hold and distribute the weight better. effectively keeping my tire carrier from ripping out by accident.
#5
Senior Member
Join Date: Dec 2010
Location: Linthicum, Md
Posts: 903
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Cherokee
Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM
thats still $800 - might as well go the extra $100 at that point
the detours is a very good swing and recovery point for a rig.
other options 820 gets a JCR to your door
http://www.jcroffroad.com/Merchant2/...egory_Code=XJB
$120 gets you the major parts you need
From A to Z fab
http://www.atozfabrication.com/store...lders-Kit.html
from AJS offroad armor
http://www.ajsoffroadarmor.com/produ...cat=256&page=1
other options 820 gets a JCR to your door
http://www.jcroffroad.com/Merchant2/...egory_Code=XJB
$120 gets you the major parts you need
From A to Z fab
http://www.atozfabrication.com/store...lders-Kit.html
from AJS offroad armor
http://www.ajsoffroadarmor.com/produ...cat=256&page=1
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)