slip yoke eliminator
CF Veteran
Joined: Jun 2011
Posts: 2,858
Likes: 1
From: Nor-Cal
Year: 1990
Model: Cherokee
Engine: The venerable 4.0
Eliminates the slip yoke :-D. The slip yoke is at the back of the transfer case. It is attached to your driveshaft and slides in and out of the output housing as the suspension cycles. With the sye it gets rid of that and solidly bolts the driveshaft to the output shaft. Then you use a two piece driveshaft that slides. The front driveshaft is set up like this. Look at the difference from where the front goes into the transfer case and where the rear goes into the transfer case.
Member
Joined: Mar 2010
Posts: 107
Likes: 0
From: So-Cal
Year: '93
Model: Cherokee
Engine: 4.0L straight-6
Eliminates the slip yoke :-D. The slip yoke is at the back of the transfer case. It is attached to your driveshaft and slides in and out of the output housing as the suspension cycles. With the sye it gets rid of that and solidly bolts the driveshaft to the output shaft. Then you use a two piece driveshaft that slides. The front driveshaft is set up like this. Look at the difference from where the front goes into the transfer case and where the rear goes into the transfer case.
Thread
Thread Starter
Forum
Replies
Last Post
ROCKRIDGE 4WD
Vendor Showcase
1
Dec 22, 2018 09:49 AM
Raney120
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
22
Oct 16, 2015 11:27 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)