school project...help plz its for me to grad highschool...!!!!
Thread Starter
::Regional Moderator::
Joined: Aug 2011
Posts: 4,742
Likes: 10
From: Jacksonville, NC
Year: 1993
Model: Cherokee
Engine: I6 4.0L HO
Ok guys so i have to do a senior project to grad from highschool. I was wondering if you guys could help me...i need to work on my jeep xj's engine for 15 hours in total...i need suggestions on what i could do...my engine right now runs great i need to come up with 15 hours.
Thread Starter
::Regional Moderator::
Joined: Aug 2011
Posts: 4,742
Likes: 10
From: Jacksonville, NC
Year: 1993
Model: Cherokee
Engine: I6 4.0L HO
Thread Starter
::Regional Moderator::
Joined: Aug 2011
Posts: 4,742
Likes: 10
From: Jacksonville, NC
Year: 1993
Model: Cherokee
Engine: I6 4.0L HO
CF Veteran
Joined: Feb 2011
Posts: 2,450
Likes: 2
From: Dubuque IA,Libertyville IL
Year: 1992
Model: Cherokee
Engine: 4.0 HO
motor mounts arent hard to do on the XJ it just takes awhile to do it but pretty simple. are u doing this in class or in ur garage/driveway?
Trending Topics
Thread Starter
::Regional Moderator::
Joined: Aug 2011
Posts: 4,742
Likes: 10
From: Jacksonville, NC
Year: 1993
Model: Cherokee
Engine: I6 4.0L HO
Ok so I'm going to...do a tune up. Do a valve gasket replace.. Paint it...then go in and change my injectors throttle body upgrade to bored. Then header and intake from a 99. Then fake making my CAI BC I have one home made
CF Veteran
Joined: Jun 2011
Posts: 2,858
Likes: 1
From: Nor-Cal
Year: 1990
Model: Cherokee
Engine: The venerable 4.0
Don't forgetting to change the oil. I would throw a timing chain in for good measure. And if you really want you could do the pan gasket and the rear main seal. Myself I would pull the intake and exhaust manifolds and the head, do a mild port and polish and take it to get a 3 angle valve job and have it milled. Also gasket match the intake. All that and you would have close to 15 hours.
Resident Zombie Hunter
Joined: Aug 2010
Posts: 3,542
Likes: 2
From: Virginia
Year: 1997
Model: Cherokee
Engine: 4.0L
Oil change, seafoam, "upgrade" your injectors, valve gasket painting, replace all your hoses, tune up, exhaust, replace brake pads/drums, electric fan conversion.



...i could make a snorkle. Motor mounts...ohh my lol