I bought rustys 3" coils with the 150lb spring rate. The coils gave me 3" of lift as expected on the passenger side. But on the drivers side front I am only at 2" of lift. Need help! Also I now have death wobble. Could this be because of the uneven front? Help please!

In front:

• RC Adjustable track bar
• RC 3" lift shocks
• Rustys 3" coil springs

In rear:

• Procomp 3" rear leaf pack
• RC 3" lift shocks

I also did the jeep aligned, as well as the track bar, at a local offroad shop.

 

can you put up some pics of the installed spring

 

are the part numbers on both springs the same?

are the spring isolators still isntalled on both sides?

and are the springs both correctly clocked and seated?

 

Is the track bars adjusted correctly? Were bolts torqued with the suspension, loaded? Is the alignment, Correct for the lift? Was it sitting level BEFORE the lift? Are the Ball Joints and TREs all good? Are control arm bushings good? Is swaybar connected and not bent?

 

I've got a lot of questions to answer.. I'll work on some pics and getting more information up here.