Roll cage
Thread Starter
Member
Joined: Oct 2011
Posts: 135
Likes: 0
Model: Cherokee
Originally Posted by lowrange2
Personally, if you want cheap and safe in the same cage you need to visit T&J Performance.
1: It costs less than $800. You don't need a bender and it fits perfectly.
2: You won't have a hideous ineffective exo cage.
3: It'll hold up nicely and look good.
The only thing I would suggest is a bit more triangulation on the inside, primarily at the b-pillars.
http://tandjperformance.com/store/in...&products_id=7
Like so:
1: It costs less than $800. You don't need a bender and it fits perfectly.
2: You won't have a hideous ineffective exo cage.
3: It'll hold up nicely and look good.
The only thing I would suggest is a bit more triangulation on the inside, primarily at the b-pillars.
http://tandjperformance.com/store/in...&products_id=7
Like so:
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
What do you want to be different?
How much of the roof is missing?
Would it happen to be cut like this?
Minus the back door?
I don't know, I've never asked. They have a phone number on the site.
How much of the roof is missing?
Would it happen to be cut like this?
Minus the back door?
I don't know, I've never asked. They have a phone number on the site.
Thread Starter
Member
Joined: Oct 2011
Posts: 135
Likes: 0
Model: Cherokee
Originally Posted by lowrange2
What do you want to be different?
How much of the roof is missing?
Would it happen to be cut like this?
Minus the back door?
I don't know, I've never asked. They have a phone number on the site.
How much of the roof is missing?
Would it happen to be cut like this?
Minus the back door?
I don't know, I've never asked. They have a phone number on the site.
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Do you have any idea what kind of design you want?
You can put that 8 point cage in for 800 bones and it'll do just fine. If you want to come back later, hack the back off and add tube you can but it'll keep your head safe in the mean time...
I don't see you making a 'cheap' cage the way you want it on the first go-around.
You can put that 8 point cage in for 800 bones and it'll do just fine. If you want to come back later, hack the back off and add tube you can but it'll keep your head safe in the mean time...
I don't see you making a 'cheap' cage the way you want it on the first go-around.
Member
Joined: Dec 2011
Posts: 149
Likes: 1
From: Menifee, CA
Year: 1989
Model: Cherokee
Engine: 4.0
1.75 x .120 wall weighs 2.09lbs a foot so it should weigh around 334lbs
i agree t&j's cage is a well thought out kit and fits great, its the best fitting cage i personally have ever seen.
give them a call 714-633-0991
Personally, if you want cheap and safe in the same cage you need to visit T&J Performance.
1: It costs less than $800. You don't need a bender and it fits perfectly.
2: You won't have a hideous ineffective exo cage.
3: It'll hold up nicely and look good.
The only thing I would suggest is a bit more triangulation on the inside, primarily at the b-pillars.
http://tandjperformance.com/store/in...&products_id=7
Like so:
1: It costs less than $800. You don't need a bender and it fits perfectly.
2: You won't have a hideous ineffective exo cage.
3: It'll hold up nicely and look good.
The only thing I would suggest is a bit more triangulation on the inside, primarily at the b-pillars.
http://tandjperformance.com/store/in...&products_id=7
Like so:
give them a call 714-633-0991
Do you hear banjos?
Joined: Apr 2008
Posts: 9,644
Likes: 6
Model: Cherokee