Rock jock 60 or Dana 44
Thread Starter
Member
Joined: Jan 2011
Posts: 185
Likes: 0
From: Grants, New Mexico
Year: 1989
Model: Cherokee
Engine: 4.0L
I have an 89 Cherokee lifted 6" on 33's right now and plan on going to 35's need some help deciding what set of axle assembly to get for front and rear? Any ideas
FWIW,
I'm running D44's front and rear with 35's and a V8.
My son is on 35's as well with stock shafts in his D30 and alloys in his 8.25.
Massive axles aren't always the best choice. The diff on a D60 is massive and unless you're going to run 35 spline shafts and really beat on it, well there are less expensive options.
There are a lot of
I'm running D44's front and rear with 35's and a V8.
My son is on 35's as well with stock shafts in his D30 and alloys in his 8.25.
Massive axles aren't always the best choice. The diff on a D60 is massive and unless you're going to run 35 spline shafts and really beat on it, well there are less expensive options.
There are a lot of
Trending Topics
I would suggest not spending "Alloy" money on a d35, it's rather pointless.
What I would suggest doing is replacing the D35 with an 8.25, D44, or a Ford 8.8.
The 8.35 (29 spline) is easy to comby and relatively cheap. The 8.8 is also very common. D44 is a great choice...if you can find one. When I get my hands on them they move out of my shop rather quickly.
What I would suggest doing is replacing the D35 with an 8.25, D44, or a Ford 8.8.
The 8.35 (29 spline) is easy to comby and relatively cheap. The 8.8 is also very common. D44 is a great choice...if you can find one. When I get my hands on them they move out of my shop rather quickly.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
May 5, 2024 12:21 PM
extrashaky
Other Vehicles. Other Jeep models & cars and trucks of other makes
17
Jun 17, 2023 03:57 PM
Freakn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
52
Oct 4, 2015 06:34 AM
Lightning_19k
Modified XJ Cherokee Tech
14
Oct 3, 2015 09:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



