So im thinking about re-gearing when i get my IRO 5.5inch long arm kit and i want 32inch tires. i have a 95' Chrysler 8.25 27 spline axle. I tried looking up new gears for it but couldn't find anything. I just need some ideas. Anything will help. Also thinking about locking the rear.

 

Look at sites like Randy's ring and pinion and completeoffroad or Seriousoffroad on here. They all have gear sets as well as package deals. BTW you axle spline count won't matter for the gears, an 8.25 is an 8.25.

 

Thanks for the direction pointing.

 

The spline is just off the TC end right?

 

The spline count is for the axle shafts and really only comes into play if you're putting in a locker or swapping to stronger shafts.

 

sounds like you havent really looked into it yet. but cost of regear is like $1500 (including install and locker)
just incase you didnt know.

IRO 5.5 = $1400.00
tires = $800.00-$1100.00 (new)
regear = $1500.00

not sure what your budget is but that puts you at around $4000.00

so if you're gonna regear I'd go for 4.56's
and I like 4wp because they dont charge shipping if you pick up in-store. dont ask them for any advice or customer service though. lol

 

not all ways true with the cost for regearing. my going to be regearing my full width axles soon and all the parts with a rear locker came out to be 500 for 2 gear sets master install kits and a full spool and this is for 5.13 gears

 

No I was just thinking and looking at what it would cost. Tanks for the help though

 

spool is less expensive. should be $400 for gears, $200 for installs, $90 for front carrier, bout $300 for lunchbox (I wouldnt lunchbox my own rear personally). then about $200 to gear each axle (for the average guy).

I'm also getting my installs done for cheaper. it can be done. I was just offering average going rates. but where did you get gears and installs for only $500!??

 

i get them from a local 4x4 shop in town gears were 400 and spool was 97. he is throwing in the install kits for no cost since i will be advertising and sending some of my friends there and they are getting deals also

 

450 shipped in the vendor section with master install kits

https://www.cherokeeforum.com/f10/4-...ivered-131588/

 

good stuff keep me posted on that I'm gonna need a set in a couple months.
I'm just gonna need an hp30r overhaul. I'll save the link

@XJ-92 does that local shop ship?

 

I think I'm gonna go with that soon. Thanks so much

 

yes they do heres their website http://completeoffroad.com/

 

EXCELLENT company to deal with. All the gears I've bought for my rigs and cars have come from them and they are great to deal with. Even when I was running my turdy five the swapped broken shafts that I got from them no questions asked several times and even offered to give me my money back. Great prices and they have package deals for front and rear too.