rear tube bumper
#1
Junior Member
Thread Starter
Join Date: Apr 2014
Location: Fairfield, California
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0l inline 6 cyl
rear tube bumper
Anyone have any good pictures of rear tube bumpers? I have a guy that is going to weld a bumper for me, just need some ideas. Any pictures of a bumper off the vehicle would be great.
#2
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Making good tie in brackets is highly suggested after that its pretty much owner choice. I do suggest cutting slots in bumper and and extending brackets thru and weld inside and out.....https://www.cherokeeforum.com/f58/re...-build-181416/
#3
Junior Member
Thread Starter
Join Date: Apr 2014
Location: Fairfield, California
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0l inline 6 cyl
Thanks for the tip! I was hoping for someone to have an idea on how to make it strong enough to be used as a recovery point and to carry a tire carrier.
#4
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Tying in a hitch under it what I plan on ,that way you sandwiching the frame between the bracket and hitch .Then using the hitch for pulling and bumper for protection. Im using 6x4 sch 40 rectangular tube for a bumper myself. That way it matchs body lines and front bumper.
Last edited by freegdr; 05-01-2014 at 08:03 PM.
Thread
Thread Starter
Forum
Replies
Last Post
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)