All 4 on my 92 came out without much resistance once I was able to get a long enough ratchet extension and some leverage on them.

 

or live in a city where they treat the roads with salt because of all the snow.... Rust doesn't care what grade it is.

 

Drilling them out takes a hell of a lot longer than knocking them out.

 

So I got one shock in. 3 weld nuts out. My air hammer took a poop on the last one. Went to harbor frieght bought a new one for 15$. Damn thing didn't even work. So I otta go back and exchange it tomorrow

 

sledge and a center punch works too if you don't have air.

 

Does anyone have a quick write up on how to use the old sway bar mounts as a bpe? Just curious.

 

just bend them out a little til the shock fits in em, bolt em up there, then put a bolt through em to hold the shock in. Not much to write up.

 

Yea, I used an impact socket and beat it in there with a hammer til it was wide enough.

Just to let you know if you put them on the rear it stops the shocks from moving like they should because it turns the mount.