Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:

Rear axle swaps

Thread Tools
 
Search this Thread
 
Old Feb 12, 2014 | 03:46 PM
  #46  
Demonoid369's Avatar
CF Veteran
 
Joined: Mar 2013
Posts: 1,023
Likes: 0
From: salem, OR
Year: 1997
Model: Cherokee
Engine: 4.0L
Default

Screw 14bolt, just get rockwells. Go big or go home..
Reply
Old Feb 12, 2014 | 05:28 PM
  #47  
stang65's Avatar
CF Veteran
 
Joined: Aug 2012
Posts: 1,592
Likes: 0
From: oregon
Year: 1993
Model: Cherokee
Engine: 4.0 ho 99 intake ps pump 1" tb spacer 62mm bored tb eletric fans and more
Default

my jeep has the common hp44 9" swap im below 4000lbs but I dont have a full cage and limited armor. after the recent wheelin trips on rocks mud and snow. the extra weight down low with the added width is night and day from the hp30/8.25. but I dont ever plan on going of 37s or i would have gone narrowed 60 on a sterling or shaved 14bolt narrowed.
Reply
Old Feb 12, 2014 | 07:06 PM
  #48  
N20jeep's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 6,685
Likes: 6
From: Jacksonville, FL
Year: 92
Model: Cherokee
Engine: 4.0
Default

Originally Posted by Atmos
I'm shooting for 4700lbs without me in it, half tank of gas and a spare

good luck!
I was at 4320lbs loaded before the 44 swap up front and on my lightweight 35s. Only 60lbs per corner for wheels and tires


I need to get re weighed
Reply
Old Feb 12, 2014 | 07:57 PM
  #49  
Atmos's Avatar
CF Veteran
 
Joined: Nov 2011
Posts: 7,387
Likes: 10
From: City of Trees, CA
Year: 93 2 door
Model: Cherokee
Engine: 4.0
Default

Originally Posted by N20jeep
I was at 4320lbs loaded before the 44 swap up front and on my lightweight 35s. Only 60lbs per corner for wheels and tires


I need to get re weighed
Where do you guys get weighed?

So is my number too hopeful? 4300 Is crazy light. 37" kevlars weigh like 84lbs each. Plus I figure I got maybe 350lbs more than you in the axles if not more. Guess I'm gonna have to strip it to pieces to reduce the weight
Reply
Old Feb 12, 2014 | 08:11 PM
  #50  
N20jeep's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 6,685
Likes: 6
From: Jacksonville, FL
Year: 92
Model: Cherokee
Engine: 4.0
Default

Originally Posted by Atmos

Where do you guys get weighed?

So is my number too hopeful? 4300 Is crazy light. 37" kevlars weigh like 84lbs each. Plus I figure I got maybe 350lbs more than you in the axles if not more. Guess I'm gonna have to strip it to pieces to reduce the weight
I get weighed at a scale in a truckstop near me.

You could be around there. I wouldn't worry about weight to much till you start getting over 5k.

But with my weight I had doors, full tank, spare tire, tools, parts, 1/4" bumpers, sliders, cage and winch.


New weight will have more tube, heavier wheels, 37 mtr, heavy 3 link setup, and front 44.

Last edited by N20jeep; Feb 12, 2014 at 08:15 PM.
Reply
Old Feb 12, 2014 | 08:25 PM
  #51  
Atmos's Avatar
CF Veteran
 
Joined: Nov 2011
Posts: 7,387
Likes: 10
From: City of Trees, CA
Year: 93 2 door
Model: Cherokee
Engine: 4.0
Default

Originally Posted by N20jeep
I get weighed at a scale in a truckstop near me.

You could be around there. I wouldn't worry about weight to much till you start getting over 5k.

But with my weight I had doors, full tank, spare tire, tools, parts, 1/4" bumpers, sliders, cage and winch.


New weight will have more tube, heavier wheels, 37 mtr, heavy 3 link setup, and front 44.
Oh ok. Mine will have a small tool kit, a driveline, a sleeping bag, a cooler, no winch, no doors, and 1/8" bumpers lol. I'm hoping for 4500-5000lbs. Should be alright

Hey at least those ORI's are light weight! Can't wait to see how you like those. I'm leaning toward those instead of CO's
Reply
Old Feb 12, 2014 | 08:53 PM
  #52  
stang65's Avatar
CF Veteran
 
Joined: Aug 2012
Posts: 1,592
Likes: 0
From: oregon
Year: 1993
Model: Cherokee
Engine: 4.0 ho 99 intake ps pump 1" tb spacer 62mm bored tb eletric fans and more
Default

my weight was with doors, 3/4 tank, winch, spare, half cage, bumpers and flares, discovery st 35s on alluminum 15x7.5s interor is missing creacher comforts also I have a modified 78 ford radius arms they wiegh alot. almost want to say as much as my old hp30 did lol. weighed at atruck stop near my home and at a metal scrap yard. once i go full cage, 37s and steering upgrades I hope to stay under 4500lbs
Reply
Old Feb 12, 2014 | 09:27 PM
  #53  
Atmos's Avatar
CF Veteran
 
Joined: Nov 2011
Posts: 7,387
Likes: 10
From: City of Trees, CA
Year: 93 2 door
Model: Cherokee
Engine: 4.0
Default

http://www.pirate4x4.com/forum/jeep-...l#post15815026
this makes me feel a little better. I'll be running the same stuff as sally, except 14b rear (which he has now) and 37's.

so I figure with me in it, the 14b, and loaded for the trail I'll be around 4900
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wybuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
Jan 30, 2024 08:59 AM
neocracka
Modified XJ Cherokee Tech
23
Aug 29, 2015 02:10 AM
MACherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Aug 20, 2015 01:57 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:41 PM.