So i have two different sets of bilstein shocks that i sm looking at and cant really tell which ones would be appropriate for this kit.

Part numbers 24-185622 and 24-185639

Or

front 24-188197 and rear 33-066868.

So if you have this kit with either set of these shocks please chime in.

 

I don't have that kit but I have these shocks. I'd say go with these, because I hear RE components tend to run a smidge over advertised height. So you may end up sitting a little above 3.5". Might wanna get these for that possible extra wiggle room

 

I kind of figured it would be wiser to go with the higher rated ones.

 

I am running the 5100's for the 3.5" lift they are plenty long enough. Im am shortarm and the coil is unseated 2" in this pic

 

Thanks for the pics and info. The problem is there are different models of 5100's I guess. I'm probably going to go with this version of 5100's since they are listed to have greater travel and compression rates.

front 24-188197 and rear 33-066868.


Which part numbers do you have on yours?

 

These are the part #'s
Fronts : 24-188197
Rears : 33-066868

 

That seals the deal. Thank you again.