RE EXTREME DUTY LONG ARM SUSPENSION Control arm mount welding
#1
Junior Member
Thread Starter
Join Date: Apr 2013
Location: Alamogordo NM
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
RE EXTREME DUTY LONG ARM SUSPENSION Control arm mount welding
I would like to see some clear photos of the welds required for this kit from anyone who has had it installed and welded. The instructions state "Carefully skip weld the very front and rear edges of the control arm mounts along the bottom and side of the uniframe." I have a vague idea what needs to be done, I would just like some pictures to clarify exactly what they are talking about.
Regards,
Brian
Regards,
Brian
#2
CF Veteran
Join Date: Jan 2008
Location: LI, NY
Posts: 3,671
Likes: 0
Received 8 Likes
on
8 Posts
Year: 1998
Model: Cherokee
Engine: 4.0, bolt ons for days...
sounds like they want you to stitch weld the brackets. i did it to my RK brackets on the frame side (in addition to bolting them on). dont have any pictures though... kinda like 1" of weld, 1" no weld, 1" weld, etc.
#3
Old School CF Moderator
Join Date: May 2010
Location: Chattanooga
Posts: 9,652
Likes: 0
Received 3 Likes
on
3 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Just weld it. SO long as your making good welds more cant really hurt.
My entire x-member for my 3 link is welded on.. about a foot of welds per side.
My entire x-member for my 3 link is welded on.. about a foot of welds per side.
#4
Thread
Thread Starter
Forum
Replies
Last Post
96Co
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
01-10-2024 06:17 AM
southfloridajeeps
Modified XJ Cherokee Tech
32
03-04-2023 01:10 PM
xjwolfman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
08-26-2020 12:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)