PUTCO HD headlight harness
#1
Junior Member
Thread Starter
Join Date: Oct 2011
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
PUTCO HD headlight harness
i know i know...its pretty straight forward on the install but can anyone give me a quick run down on it..having trouble finding the switch end... installing the putco harness and new head lights
THANKS!!
Tee Jay
THANKS!!
Tee Jay
#5
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,939
Received 1,540 Likes
on
1,247 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
This should help you.
Cruiser’s Headlight Upgrade Harness Instructions
Absolutely plug and play. Remove grille and headlamp bulbs. I fed my harnesses from the passenger side starting between the battery and the back of the headlamp housing, over to the driver side. Plug the driver side bulb into the new harness. Attach the new harness's ground wire under one of the small bolts on the radiator support after scraping the paint off under it. Attach the harness to the existing harness behind the grille working toward the passenger side. . Plug the new harness plug into passenger headlamp. Plug original headlamp plug into receptacle on new harness. Attach the ground for the passenger side just like you did the driver side under a radiator support bolt. Attach relays with provided bracket on the passenger side inner fender. Connect power wires to battery.
Cruiser’s Headlight Upgrade Harness Instructions
Absolutely plug and play. Remove grille and headlamp bulbs. I fed my harnesses from the passenger side starting between the battery and the back of the headlamp housing, over to the driver side. Plug the driver side bulb into the new harness. Attach the new harness's ground wire under one of the small bolts on the radiator support after scraping the paint off under it. Attach the harness to the existing harness behind the grille working toward the passenger side. . Plug the new harness plug into passenger headlamp. Plug original headlamp plug into receptacle on new harness. Attach the ground for the passenger side just like you did the driver side under a radiator support bolt. Attach relays with provided bracket on the passenger side inner fender. Connect power wires to battery.
#7
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,939
Received 1,540 Likes
on
1,247 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Thread
Thread Starter
Forum
Replies
Last Post
Stabsthedrama
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
10-03-2015 05:46 PM
BluJay
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-26-2015 10:38 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)