Hey CF. I know this has been asked a million times, but I can't seem to find a legit explanation. Bing or Google isn't helping too much. Anyone have a clear and simple write up on installing a OHC. I have a complete OHC, wiring harness and bracket. Thanks & KCCO.

 

Pretty simple.....pull headliner and passenger side pillar and kick panel follow the plug from the roof down and unplug it....then tape your new harness to the kick panel end and carefully fish it through as you pull out the old harness then drill out the old bracket and river in the new one and cut a hole where the new bracket sits in the headliner