Hey everyone, been a lurker here for a while. Long story short my mount on the axle housing for the track bar is kinda messed up. So I was like "Hey why not get a OTK Track Bar". But I was curious if anyone has done this and if I'd have any bindage.

Thanks!!

 

OTA trackbar + UTK steering = Bumpsteer.

 

Thank you for the insight.

 

You would need to get a huge drop pitman arm to correct it.

 

If you're already doing an OTA track bar mount you might as well go OTK with the steering. The track bar was always the hard part for me.

I would do the steering first so you can then dial in the track bar exactly where you need it to eliminate bump steer.