I wouldn't get them from there. Most of the time they will snap when you try to loosen the bolts on them. Just get your end links from autozone or something, I got mine there for like $15 a peice if I remember correctly.

 

Yeah they all snap off, autozone has them for 15$ with all hardware and bushings. Tell them to look under sway bar on the computer it wont come up if u call it an upper link at the desk.

 

And what am I getting haha

 

fist, you dont need long arm. Stick with what you have. Whoever said they dont flex dosnt know what they are talking about. period. your gonna have to drill and relocate the track bar when you put 4.5 coil up front. search and you will find some one who has some pics of what they did, or you can soend lots of money on a relocate mount up top, upgrage to some hiems joints and do it that way... Get the GC coils in and install some spacers with them and youll be good. You dont need a t-case drop unless when your driving you get some vibes, than all you have to do is throw in some thick under your tcase support where it mounts to the unibody, or again spend more money on a kit! but congrats man, its gonna open up a barrel of worms now!!

 

the spring boosters from autozone dont do anything.... i put new springs and blocks in the back of my xj and spring spacers up front... now it looks like a sporty jeep with the back end 2 inches higher than the front.... the spacers might have added an inch.... personally i think they are a waste of money

 

It's not your coil spacers. If they added an inch than they are one inch spacers. The coils you have aren't tall enough.

 

got lift? if so, get yourself some disco's. JKS makes good quality ones that are the easiest to use.

 

try searching yet? cause it should be right there...