I was thinking about removing my doors (2000 XJ) and I was wondering what you guys did about the wiring in the door. My goal is to have doors I can take of and put back on, but they still will be functional. Any ideas?

 

2 driver side Grand Cherokee door wiring harnesses

 

If you want to take your doors off and don't have the stuff to make the quick disconnects you can just unplug it in the kick panel and pull the wires through. It isn't hard but isn't quick ya know? It'll be your favorite mod. There is A write up in the write up section that will show you how to do it.

 

Oops here's photos.

 

This is what I meant that first one to be.



And here's all four from No_rdplz who did the write up. But you will need quick disconnects for the rear as there are no plugs to pull like there are with the fronts.

 

One of the best "under 50$" mods you can do.