Need help: Swing Out hinge
09-27-2011, 09:05 PM
#1
CF Veteran
Thread Starter
Join Date: Apr 2008
Location: Wisconsin
Posts: 3,569
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Need help: Swing Out hinge
So I have been searching for a hinge to use for my swing out tire carrier I have in the works. The most prominant ones I can find are the A to Z and RockStomper. I was wondering what hinges you guys use or if you pieces yours together and from where? Also, pictures of yours would help.
Also, same would go for whatever hatch you are using.
Also, same would go for whatever hatch you are using.
09-28-2011, 07:54 PM
#3
CF Veteran
Thread Starter
Join Date: Apr 2008
Location: Wisconsin
Posts: 3,569
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0 HO
ok so I found a hinge for a lot cheaper then the two listed above so I might go that route. The only thing with that is I would have to change my design plans.
Really the only other thing I could do would be to find a roller bearing hinge like:
http://www.ihpinc.net/roller.htm
And with a hinge like that I wouldn't have to change the design. So are there any out there you guys know of?
Really the only other thing I could do would be to find a roller bearing hinge like:
http://www.ihpinc.net/roller.htm
And with a hinge like that I wouldn't have to change the design. So are there any out there you guys know of?
Thread
Thread Starter
Forum
Replies
Last Post
Calikingcrawler
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-07-2021 07:14 AM
cmcl3m0r3
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
05-21-2019 02:38 PM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
10-02-2015 08:04 PM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-21-2015 12:52 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)