Missing E-Brake linkage, steering box question
Thread Starter
Newbie
Joined: Mar 2014
Posts: 13
Likes: 0
From: Rolla, Missouri
Year: 1992
Model: Cherokee
Engine: 4.0
Missing E-Brake linkage, steering box question
Howdy folks,
Just bought a '92 Cherokee with a 4" lift and 32" tires. I am totally new to the Jeep community. Got a few questions...
1.) My Jeep is missing the entire e-brake system from the bottom of the lever handle all the way to the holes in the brake system inner plate (or whatever you call it). My local Junk yard says he doesn't sell the sheathed portion at the rear of the vehicle that connects to that plate... it goes with the axels. Any idea where I could buy this? Any junk yards that you recommend that ship parts?
2.) My steering is pretty sloppy. I replaced the lower Track Bar bushing with a polyurethane piece. that was the only joint I could see a lot of movement in with wife rocking the steering while I was under it. The original looked OK when I got it out but was a much softer material (same red color though). It definitely tightened up that joint but I'm still all over the road when I drive. I can feel a lot of slope in the steering gearbox shaft that the pitman arm attaches to so I thought I should go ahead and replace that. I'm thinking of just buying a new one, not sure of cost though. where's a good place to go for this or would a rebuilt unit be just as good ??
Any help is greatly appreciated.
thanks
David
PS: I'm posting here in the tech section because I thought my missing brake parts could be a common thing with a 4" raised Jeep. Can you not use an e-brake with a high lift ???
Just bought a '92 Cherokee with a 4" lift and 32" tires. I am totally new to the Jeep community. Got a few questions...
1.) My Jeep is missing the entire e-brake system from the bottom of the lever handle all the way to the holes in the brake system inner plate (or whatever you call it). My local Junk yard says he doesn't sell the sheathed portion at the rear of the vehicle that connects to that plate... it goes with the axels. Any idea where I could buy this? Any junk yards that you recommend that ship parts?
2.) My steering is pretty sloppy. I replaced the lower Track Bar bushing with a polyurethane piece. that was the only joint I could see a lot of movement in with wife rocking the steering while I was under it. The original looked OK when I got it out but was a much softer material (same red color though). It definitely tightened up that joint but I'm still all over the road when I drive. I can feel a lot of slope in the steering gearbox shaft that the pitman arm attaches to so I thought I should go ahead and replace that. I'm thinking of just buying a new one, not sure of cost though. where's a good place to go for this or would a rebuilt unit be just as good ??
Any help is greatly appreciated.
thanks
David
PS: I'm posting here in the tech section because I thought my missing brake parts could be a common thing with a 4" raised Jeep. Can you not use an e-brake with a high lift ???
CF Veteran
Joined: May 2011
Posts: 6,098
Likes: 250
From: DE
Year: 1988
Model: Cherokee
Engine: I6 4.0
I ripped my emergency brakes out last time I did my brakes, unless it's a manual or live in a place where you will be parking on 30* or greater slopes there's no need to have emergency brakes in an auto. IMO
CF Veteran
Joined: Sep 2009
Posts: 8,567
Likes: 20
From: ☼ Blackhole Sun
Year: My Jeep is a GMC
Howdy folks,
Just bought a '92 Cherokee with a 4" lift and 32" tires. I am totally new to the Jeep community. Got a few questions...
1.) My Jeep is missing the entire e-brake system from the bottom of the lever handle all the way to the holes in the brake system inner plate (or whatever you call it). My local Junk yard says he doesn't sell the sheathed portion at the rear of the vehicle that connects to that plate... it goes with the axels. Any idea where I could buy this? Any junk yards that you recommend that ship parts?
2.) My steering is pretty sloppy. I replaced the lower Track Bar bushing with a polyurethane piece. that was the only joint I could see a lot of movement in with wife rocking the steering while I was under it. The original looked OK when I got it out but was a much softer material (same red color though). It definitely tightened up that joint but I'm still all over the road when I drive. I can feel a lot of slope in the steering gearbox shaft that the pitman arm attaches to so I thought I should go ahead and replace that. I'm thinking of just buying a new one, not sure of cost though. where's a good place to go for this or would a rebuilt unit be just as good ??
Any help is greatly appreciated.
thanks
David
PS: I'm posting here in the tech section because I thought my missing brake parts could be a common thing with a 4" raised Jeep. Can you not use an e-brake with a high lift ???
Just bought a '92 Cherokee with a 4" lift and 32" tires. I am totally new to the Jeep community. Got a few questions...
1.) My Jeep is missing the entire e-brake system from the bottom of the lever handle all the way to the holes in the brake system inner plate (or whatever you call it). My local Junk yard says he doesn't sell the sheathed portion at the rear of the vehicle that connects to that plate... it goes with the axels. Any idea where I could buy this? Any junk yards that you recommend that ship parts?
2.) My steering is pretty sloppy. I replaced the lower Track Bar bushing with a polyurethane piece. that was the only joint I could see a lot of movement in with wife rocking the steering while I was under it. The original looked OK when I got it out but was a much softer material (same red color though). It definitely tightened up that joint but I'm still all over the road when I drive. I can feel a lot of slope in the steering gearbox shaft that the pitman arm attaches to so I thought I should go ahead and replace that. I'm thinking of just buying a new one, not sure of cost though. where's a good place to go for this or would a rebuilt unit be just as good ??
Any help is greatly appreciated.
thanks
David
PS: I'm posting here in the tech section because I thought my missing brake parts could be a common thing with a 4" raised Jeep. Can you not use an e-brake with a high lift ???
2. If the steering box is trash check the control arm bushings, TRE, and ball joints as well.
Peeps consider the parking brake "spare parts" for some reason. I use mine every time I park just out of habit even with an auto. A lot safer than depending on a cheap little pawl in the transmission.
Last edited by Turbo X_J; Mar 31, 2014 at 09:52 PM.
Thread
Thread Starter
Forum
Replies
Last Post
jessie~girl
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
4
Aug 24, 2018 03:30 AM
Hewittxj
Modified XJ Cherokee Tech
35
Aug 31, 2015 04:43 PM
olas
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Aug 27, 2015 05:57 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
