Locking up or stalling over bumps
CF Veteran
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Man, get an 8mm wrench and get on your back. Takes 15mins to get the front shaft off. Possibly 30 if its been a while for the front shaft
CF Veteran
Joined: Oct 2013
Posts: 5,924
Likes: 203
From: Greenville, SC
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Originally Posted by sycoglitch
Man, get an 8mm wrench and get on your back. Takes 15mins to get the front shaft off. Possibly 30 if its been a while for the front shaft
Senior Member
Joined: Nov 2014
Posts: 603
Likes: 1
From: Hacienda Heights
Year: 1990
Model: Cherokee
Engine: 4.0
Nothing in the driveline can stall the engine, unless the TCC is also locking when it shouldn't, so why are you all still suggesting driveline diagnoses?
Sorry for the delay on the update. I haven't had time to get back to it because of work. The problem turned out to be a bad coil causing the stall, and bad motor mounts (rubber was busted and collapsed) causing the vibration. Everything seems to be running great now. Thanks for all the help with everything.
Thread
Thread Starter
Forum
Replies
Last Post
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Aug 30, 2015 08:06 PM
Compungo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Aug 28, 2015 09:35 PM
Zerocyde
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Aug 26, 2015 09:23 PM
Kris smith
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Aug 21, 2015 05:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




