How high can u go before u have to change out ur drive shaft

 

im at roughly 7 inches with stock shafts front & rear

 

Kool..I was looking @ a 4 in.....with some 31*10.5*15...are u in a Cherokee

 

You usually want to get an sye and driveshaft starting at 3.5-4"

 

yep, 33x10.5x15

 

Nice ...what kind of lift did u get....do u have the transfer case drop kit

 

rough country 6.5" and drop control arm kit, adjustable upper/lowers and additional 2" coil spacer and 2" shackles. 5.25" drop pitman arm and the rear leaves have 6* pinion wedges installed in them, no transfer case drop, no sye.

im going to add the drop on the transfer case though just an inch to get a little back on the geometry end of such a large lift.

 

I was looking at the 4.5 lift from country with a t-case drop and running 31*10.5*15... and cut my fender wells

 

My .02

4.5"
Sye and Refurb extended drive shaft from IRO
Trim
33's
Have fun