kcdt58

I didn't want to start a new thread for this but after quite a bit of searching, I couldn't find the answer. I currently am sitting around 4.5" of lift and running a RC adjustable track bar with the weak TRE. My question is does anyone know what the thread size is on the RC TRE? I'm looking at getting the IRO double shear track bar upgrade and using it in conjunction with my RC bar. The IRO website says it will work with a M22x1.5 left hand thread rod end.

http://www.ironrockoffroad.com/Merch...egory_Code=PFX

Any feedback will help here guys.

XJ-92

Call rough country. They will give you all the specs on the track bar.

kcdt58

After multiple attempts to get someone on the phone.....it is in fact M22x1.5 LH thread.

Any feedback from anyone using the IRO heim joint setup?

eslack32

I just put on on IRO tb and brace. I'm liking it a lot so far. Steering is way tighter.

XJmike0122

The IRO DS TB upgrade doesn't have any heim joints.

kcdt58

You are correct, I didn't look close enough.

Has anyone else used this DS setup?

emptypockets

Whatcha need to know? I've had the IRO d.s. track bar setup for 2 years now.

sreeb

I'm using the IRO upgrade kit with RC bar out of the 4.5" x kit. No problems to report.

kcdt58

Just wanted opinions on how it's worked for you. Better than other setups, etc.

kcdt58

That's exactly what I plan to do. how long have you run with that setup?

sreeb

~1 year. I can't claim to have pushed it hard but it did solve some problems I was having on fast curvy roads.

kcdt58

Thanks for the feedback. Looks like I'll be ordering the kit from IRO!

timamybrown

I'm running the iro ds track bar. I ended up putting a flex joint in it on the frame side mount. Works great.