Is that so when you get into a crash you have a nice heavy Maglite aimed right at you or your GF's head?

Smart . . . maybe put a fire extinguisher on whichever pillar doesn't get the light and you could get a 2-fer.

 

Don't forget to change the sending units for the water temp and oil pressure gauge. They are different from the idiot light cluster sending units.

 

Yup - got the oil sender but missed identifying the water temp sender at the JY - just $32 for cluster, woodgrain dash inset and oil sender, BTW. Will get that water sender on my next trip..

 

Think mounting an ax on the driver side a pillar would be safer? Im mounting the mag on the trans tunel..

 

I think a rusty haligan bar would look nice on the a pillar.

 

Got my mag mounts today...should I mount to the carpeted area on the trans tunnel or on the plastic part by the transfer case shifter?

 

What about between the door and seat on the floor?

 

Heres a little something i did today. Also scored a husky liner at the jy.

 

Where to mount that lite? A little interior mod to aid drainage on those deep water crossings.

 

Looks Damn good...what did you use for the cord?

 

Got my mounts installed and bought a 40 dollar led maglite..it is by far the brightest flashlight i've ever seen pics soon!

 

I used walmart bungee cords that have the adjustable ***** on them. Thye come in a little square box with 8 pieces.

 

Ill prolly go pick some up..hoe did you secure them

 

How did you attach the bungies to the plastic?

 

Sorry. i took a while. I used quarter inch electrical wire holder the kind you use when you are running small wire around your house. I screwed it in with a self tapping sheet metal screw.

Today i went to lowes and they had a coax cable clips that were black and beefy. If you took out the screw in the middle and ran a bolt and nut instead it would be bullet proof.