input same?
#1
Junior Member
Thread Starter
Join Date: Apr 2012
Location: southern illinois
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
input same?
Ok found a transfer case that already has a sye kit and the driveshaft with it reasonably priced but its off a ax15 manual trans and I have an aw4 auto. Does someone know if it will work for me? U know if length b correct and input shaft the same.. thanks
#3
Cherokee Forum Vendor
Join Date: Mar 2011
Location: Lynden, WA
Posts: 1,448
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0
Spline count didnt change between the cases. It changed depending on year. 90 and earlier is 21 spline, 91 and later is 23 spline. There is a slight chance that the input shafts are different lengths, but like Pockets said, they are pretty easily changed out if you have ever had a t case open before.
Kris Froehlich
Kris Froehlich
#4
::Regional Moderator::
Join Date: Jul 2011
Location: Over here...
Posts: 2,912
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1986
Model: Cherokee
Engine: 2.8
This has been pretty useful for me in the past: http://www.novak-adapt.com/knowledge...nput_gears.htm
Wrong size snouts if the splines aren't the same. Like I said before, just swap your inputs.
Wrong size snouts if the splines aren't the same. Like I said before, just swap your inputs.
Thread
Thread Starter
Forum
Replies
Last Post
SergeK
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
02-27-2023 03:38 PM
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
07-20-2016 04:38 PM
kend3031
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
09-30-2015 08:15 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)