My jeep suddenly started running like crap.
I hooked it up and computer said injector 2 was bad.I changed all injectors,replaced pigtails and fixed any burnt wires.
Now 2 and 4 injectors are not working.I changed the only pigtail I didn't replace,number 4,still 2 and 4 are not working.
Any thoughts?
I haven't hooked a noid up to check the power but I can't see anything wrong.

 

Could 2 and 4 be swapped. Plugged into wrong injector

 

I don't think so.
they are so far apart.
They share a wire though.
That's why I thought I was gonna fix it when I seen the burnt wire on number 4.

 

I reset the computer the way it tells you too on Quadratech but it's still only firing on four cylinders.
I don't know if I need a computer or what.

 

Or if those two brand new injectors are bad.
The internet says if they have power but no ground then it is the computer but how do I tell that?

 

ok

 

Check the injector ohms and if that's okay them check power and ground to injector with a noid light to see if the computer is working on those cylinders .

 

Which injectors did you get, and where?

 

Remanufactured Bosch ev6 with four holes of eBay.

 

ok

 

I got it fixed anyway.

 

ok

 

Well? What was the fix?

 

ok

 

what was the fix?