I have a 96,4.0 5 spd,4x4.Installed 703's and reset comp. Now it runs very rich and check engine light comes on,what next?

 

Dont quote me on this since ive never done this swap,
but I believe it takes 30 starting cycles for the computer to relearn the new injectors.

 

50 cycles, and Check to make sure none of your new injectors are stuck open.

 

If you reset the ecu and are still running rich you probably have a fouled spark plug (causing the CEL). Pull the injectors and test each one (9V battery and wire, you should hear a "click" when the injector gets power) to make sure none are stuck open. Also pull your plugs to make sure none are fouled out.

 

Found open injector and swapped it out ,and all is well. Thanks