JSilva627

ok so monday my trucks going in the shop. I bought a 3inch rough country add a leaf ( not happy about it but whatever ) but i also replaced my leaf springs with brand new crown heavy duty ones. If i do add a leaf what size U-bolts am i going to need???

Ben824

Same size as before, just with longer threads. They do not make different lengths usually in our Jeep world. The size differences will be in reference to the diameter of the axle tube. So in order to give you an answer in that retrospect you will need to tell us what rear axle you have.

JSilva627

completely forgot about that haha. dana35

JSilva627

any luck?

XJSETH

YOU FACTORY U BOLTS MAY WORK BUT YOU CAN ORDER SEVERAL U BOLT KITS FROM VARIOUS VENDORS THAT ARE MADE FOR THE DANA 35 BUT LONGER HERES 2
http://www.4wheelparts.com/Lift-Kits...&t_pn=EXP50055
AND RUBICON
http://www.4wheelparts.com/Lift-Kits...pn=R%2fERE1225

Lead Foot

Most local leaf spring shops will also make you set specific to your desired length for about 50 bucks. Your stock ones will most likely not be long enough, and thats if you can even get those rusted nuts off of there without snapping the bolt or damaging the threads.

XJSETH

I believe the do actually.

XJSETH

this is also an option..

JSilva627

I need to find something before monday. This is what autozone has -
http://www.autozone.com/autozone/acc...mString=search

nwhit2004

I used the autozone ones on my jeep with a 8.25 they had more than long enough. i just matched the old u bolts with the the ones in the box at the store.

zimdogg

The U-bolts for D35 are 2 1/2", C8.25 are 3.0"