Does anyone know anyplace I can buy valve seals, springs, retainers, and seats for a 89 4.0 head? I ordered a cam kit from Comp cams and went to assemble the head and these items didn't fit, I then learned that the heads changed from 88 to 89 and that the kit wont work for the 89+ heads, comp cams doesn't make the parts for the 89+ heads, and I can't use stock valve springs with the cam that I have. Any links and part numbers would help, thanks guys.

 

Anyone?

 

maybe try calling a few junkyards n seein if anybody has good heads for ur motor... mayb try swappin parts???

 

the springs have to be stiffer than stock, i found seals but still need seats and springs

 

look up on google for vehicles with stiffer same sized springs I'm sure you can snag em from a donor

 

https://www.cherokeeforum.com/f59/hi...ormance-67411/

 

Ok maybe someone can help me out and tell me if the info that I have is wrong. I ordered a comp cams cam kit (cam, springs, seals, lifters, the whole 9 yards), I tried to assemble the head but the springs were too wide, and the the seals were too big. I called up comp cams and they said that the kit only worked in the 88 and lower years and that the heads changed in the 89+ years. I've tried looking for valve springs and they are all listed as "all years", checked part numbers at autozone and kragen and they all have the same part number for all years. Can anyone help me out? I would run the factory springs but the cam info stated it needs stiffer springs.

Here is the cam I have
http://www.compperformancegroupstore...ode=A6CAMSx4X4

 

anyone? please? any info?

 

the sites i posted to you eariler could not help

 

http://www.cranecams.com/40-41.pdf

 

They will help if i can find out if all the valve springs are the same or if there is a difference, thats what I'm trying to figure out.

 

TTT, anyone else have any info?

 

personaly i would send all the stuff back and go with a nother company they sold you a incorrect part