When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I can't see any arrows on my main caps, so how can I figure out which direction they go? And second question is I have Scat connectiong rods they have a dot on one side does that side face to the front?
So you tore it apart without marking anything?
The caps need to be in their original position too...
Not sure what yours looks like, but on my 89 block the caps were numbered. Looks like the cam side would be the bottom of the number. Hard to explain though text ... Like
1 2 3 4 5 6
-------------------------
Cam
on my 2000 block, looks like the caps werent numbered, but the shorter half of the gap casted into the cap was on the non cam side.
So you tore it apart without marking anything?
The caps need to be in their original position too...
Not sure what yours looks like, but on my 89 block the caps were numbered. Looks like the cam side would be the bottom of the number. Hard to explain though text ... Like
1 2 3 4 5 6
-------------------------
Cam
on my 2000 block, looks like the caps werent numbered, but the shorter half of the gap casted into the cap was on the non cam side.
Mine has numbers and I didn't tear it apart I got it that way.
Have a bottom end question
